User guide

3 9035 Function Submenu List and Descriptions
3-12 9035 PRODUCT MANUAL 9035-OM (V4.4)
(continued)
• Status Displays Individual signal status displays for AES pairs 1-8, and embedded audio
channels 1-16 as follows:
• Not Present: Indicates AES pair or embedded channel does not
contain recognized audio PCM data.
Note: Channel displaying Not Present may still carry usable audio
data with Not Present being displayed due to invalid
headers.
• Present, Professional: Indicates AES pair or embedded channel
contains recognized AES audio PCM data.
• Present, Consumer: Indicates AES pair or embedded channel
contains audio PCM data other than AES (for example, S/PDIF).
• Present, Dolby E: Indicates AES pair or embedded channel
contains Dolby
®
E encoded data.
• Present, Dolby Digital: Indicates AES pair or embedded channel
contains Dolby
®
Digital encoded data.
Note: Dolby status displays shown to the left only occur for valid
Dolby
®
signals meeting SMPTE 337M standard.
(9035 only) The 9035 card does not perform Dolby
®
processing on the signal. Although the 9035 controls will
appear to be usable for this signal tag, the signal is passed
with 1-to-1 routing and all related gain and polarity controls
set to unity.
(9035-DEC only) When Dolby
®
E or Dolby
®
Digital™ is
present on a discrete AES pair or an embedded audio pair,
the decoder can provide up to 10 decoded channels
(according to the Dolby
®
sub-format and received
metadata). All channels are available as inputs to the audio
router.
• Embedded Unity Channel Selection Selects unity reset of Embedded Audio Group 1/2 and 3/4 controls and
re-establishes default 1-to-1 routing as follows:
• Embedded: Routes Embedded Ch 1 thru Ch 16 as sources to
destination channels Embedded Ch 1 thru Embedded Ch 16.
• AES: Routes AES Ch 1 thru Ch 16 as sources to destination
channels Embedded Ch 1 thru Embedded Ch 16.
• Analog: Routes Analog Ch 1 thru Ch 8 as sources to destination
channels Embedded Ch 1 thru Embedded Ch 8. Sets Embedded
Ch 9 thru Ch 16 to Silence.
• AES Unity Channel Selection Selects unity reset of AES Outputs Pairs 1-4 and 5-8 controls and
re-establishes default 1-to-1 routing as follows:
• Embedded: Routes Embedded Ch 1 thru Ch 16 as sources to
destination channels AES Ch 1 thru AES Ch 16.
• AES: Routes AES Ch 1 thru Ch 16 as sources to destination
channels AES Ch 1 thru AES Ch 16.
• Analog: Routes Analog Ch 1 thru Ch 8 as sources to destination
channels AES Ch 1 thru AES Ch 8. Sets AES Ch 9 thru Ch 16 to
Silence.
Table 3-2 9035 Function Submenu List — continued
•
•
•
•
•
•