User guide

3 Accessing the 9035 Card via Remote Control
3-6 9035 PRODUCT MANUAL 9035-OM (V4.4)
Accessing the 9035 Card Using a Cobalt
®
Remote Control Panel
Press the Select Device key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9035_DB_ACCESS3A2.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example, “1 9035 - Receiver 21
Input Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
9035_3366_3392.JPG