User guide

1 Technical Specifications

1-22 9035 PRODUCT MANUAL 9035-OM (V4.4)

Technical Specifications

Table 1-2 lists the technical specifications for the 9035 HD/SD Frame Sync

with Audio Embedding/De-Embedding and Dolby

Decoding Option card.

Table 1-2 Technical Specifications

Item Characteristic

Part number, nomenclature • 9035 HD/SD-SDI – Analog In Frame Sync with Audio

Embedding/De-Embedding

• 9035-DEC HD/SD-SDI – Analog In Frame Sync with Audio

Embedding/De-Embedding and Dolby

Decoding Option

Installation/usage environment Intended for installation and usage in frame meeting openGear

modular system definition.

Power consumption < 15 Watts maximum

Environmental:

Operating temperature:

Relative humidity (operating or storage):

32° – 104° F (0° – 40° C)

< 95%, non-condensing

Frame communication 10/100 Mbps Ethernet with Auto-MDIX.

Indicators Card edge display and indicators as follows:

• 4-character alphanumeric display

• Status/Error LED indicator

• Input Format LED indicator

Controls Card edge switches as follows:

• Menu Enter pushbutton switch

• Menu exit pushbutton switch

• Up/down selection toggle switch

Internal Tone Generators Four built-in tone generators, each configurable for 18 discrete

sine wave frequencies ranging from 50 Hz to 16 kHz.

Generator source signal level is equivalent to -20 dBu.

A/D Process HD: 4:4:4

SD: 8:8:8

Resolution: 12-bit A/D and 10-bit video data path

SD Comb Filter: 5-line adaptive

Serial Digital Video Input Data Rates Supported:

SMPTE 292 HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps

SMPTE 259M-C SD-SDI: 270 Mbps

Impedance:

75 Ω terminating

Equalization (HD):

328 ft (100 m) Belden 1694A