Instruction Manual

9033-OM (V4.0) 9033 PRODUCT MANUAL 3-15
Operating Instructions 9033 Function Submenu List and Descriptions
AFD
Allows assignment of AFD (Active Format Description)
codes to the SDI output video.
Note: This function only marks the SDI output with an AFD code. Actual AFD processing must be performed by a downstream
card or system that recognizes an AFD code assigned here.
• Output Mode Drop-down selection determines action to take in presence or absence of
existing AFD code on input video.
Note: The Incoming AFD and Pass Incoming AFD Code selections, while
present on this card, are non-functional since the analog video input does
not support AFD code embedding.
AFD
• Output Code Drop-down list assigns desired AFD to output SDI.
• Output Line Allows selecting the line location of the AFD data within the video signal
Ancillary Data space. (Range is 9 thru 41.)
Note: • Although the output line drop-down will allow any choice within the
9 thru 41 range, the actual range is automatically clamped (limited)
to certain ranges to prevent inadvertent conflict with active picture
area depending on video format. See Ancillary Data Line Number
Locations and Ranges (p. 3-8) for more information.
• The card does not check for conflicts on a given line number.
Make certain the selected line is available and carrying no other
data.
Table 3-2 9033 Function Submenu List — continued
•
•
•
1: AFD codes numbering and definitions conform to SMPTE 2016-1-2007.
2: Image Protected implies picture content that must not be cropped by
conversion processes or display devices. Alternate center formats may
have protected center areas, with areas outside of the protected area not
containing mandatory content.
4:3 Coded Frame
AFD Code
(1)
Description AFD Code
(1)
Description
– No code present 1001 Full frame
0000 Undefined 1010 16:9 (center)
0010 Box 16:9 (top) 1011 14:9 (center)
0011 Box 14:9 (top) 1101 4:3 (with alternate
14:9 center)
0100 Box > 16:9 (center) 1110 16:9 (with alternate
14:9 center)
(2)
1000 Full frame 1111 16:9 (with alternate
4:3 center)
(2)
16:9 Coded Frame
AFD Code
(1)
Description AFD Code
(1)
Description
– No code present 1001 4:3 (center)
0000 Undefined 1010 16:9 (image
protected)
(2)
0010 Full frame 1011 14:9 (center)
0011 4:3 (center) 1101 4:3 (with alternate
14:9 center)
0100 Box > 16:9 (center) 1110 16:9 (with alternate
14:9 center)
(2)
1000 Full frame 1111 16:9 (with alternate
4:3 center)
(2)