Instruction Manual

2 Installing a Rear I/O Module
2-8 9033 PRODUCT MANUAL 9033-OM (V4.0)
RM20-9033-F Provides the following connections:
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y/Cmpst, Pr/C, and Pb, respectively)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Two buffered SDI coaxial outputs (SDI OUT)
• Dolby
®
RS-485 metadata output (RS-485)
Note: On card with +LTC option, this connector
provides RS-485 LTC I/O as well as Dolby
metadata output (selectable using card
control).
RM20-9033-E-DIN-HDBNC High-density rear modules provides the following
connections:
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y/Cmpst, Pr/C, and Pb, respectively)
• Four dedicated AES coaxial audio inputs
(AES IN 5 thru AES IN 8)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Six dedicated AES coaxial audio outputs
(AES OUT 1 thru AES OUT 6)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9033-E-HDBNC or RM20-9033-E-DIN,
respectively.
Table 2-1 9033 Rear I/O Modules — continued
9033 Rear I/O Module Description