Manual

Input:
Number of Inputs 4
Input Standard 4:2:2 SDI 525 or 625 line SMPTE 259-C
Equalization Auto to 1000' Belden 1694 (typical)
Return Loss >15 dB at 270 Mbit
Output:
Number of outputs 6 (A:1, B:1, C:2, D:2)
Format Analog Composite video tracking input line standard
Line Standard Auto-detecting 525/625
Video Level 100 IRE +5 / -10 IRE (user adjustable)
Sync -300 mV +/- 75 mV
Frequency Response 0-5 MHz +/- 0.25 dB
K-Factor <1.5%
Differential Gain <1%
Differential Phase <1%
Noise <70 dB
Chroma Luma Delay <2 nSec
SCH Phase <2 degrees
Quantizing 8 bit input converted internally to drive 10 bit DACs
Setup User selectable on/off for NTSC (Fixed off for PAL)
Return Loss >35 dB at 5 MHz
Power:
Positive Rail (+12V) 7.5 Watts
Negative Rail(-7.5V) 0.3 Watts
Temperature range: 40-120 degrees F. ambient (non-condensing).
Internal component limit 75 degrees C.
Indicators: Data lock indicator one per converter
Notes: Specifications subject to change without notice. This product is not authorized for use in life support systems.
Product liability limited only to the replacement of this unit. Cobalt Digital Inc. does not assume any liability for loss of use
due to failure of this component.
Copyright 2001-2007 Cobalt Digital Inc.
Ofc: 217 344-1243
Fax: [phone]
[e-mail]
www.cobaltdigital.com
Cobalt Digital Inc.
2406 E. University Ave.
Urbana, IL 61802
9018 Owner's Manual
Specifications:
Page 4 of 4
Rev 1.1 rmw