Manual

Input:
Number of Inputs 3
Input Standard 4:2:2 SDI 525 or 625 line SMPTE 259-C
Equalization Auto to 1000' Belden 1694 (typical)
Return Loss >15 dB at 270-Mbit
Outputs (Analog):
Number of outputs 7 - User configurable Analog Composite or Reclocked SDI
Format Analog Composite video tracking input line standard
Line Standard Auto-detecting 525/625
Video Level 100 IRE +5 / -10 IRE (user adjustable)
Sync -300 mV +/- 75 mV
Frequency Response 0-5 MHz +/- 0.25 dB
K-Factor <1.5%
Differential Gain <1%
Differential Phase <1%
Noise <70 dB
Chroma Luma Delay <2 nSec
SCH Phase <2 degrees
Quantizing 8 bit input converted internally to drive 10 bit DACs
Setup User selectable on/off for NTSC (Fixed off for PAL)
Return Loss >35 dB at 5 MHz
Outputs (Digital):
Number of Outputs Up to 7 - user configurable and shared with analog outputs above.
Format Reclocked SDI 270 M-bit
Return Loss >17 dB at 270 M-bit
Power:
Positive Rail 6.2 Watts
Negative Rail 0.3 Watts
Temperature range: 40-120 degrees F. ambient (non-condensing). Cooling fans recommended for
loaded frames. Internal component limit 75 degrees C.
Indicators: Data lock indicator one per converter
Notes: Specifications subject to change without notice. This product is not authorized for use in life support systems.
Product liability limited only to the replacement of this unit. Cobalt Digital Inc. does not assume any liability for loss of use
due to failure of this component.
Copyright 2003-2012 Cobalt Digital Inc.
Ofc: 217 344-1243
Fax: [phone]
[e-mail]
www.cobaltdigital.com
Cobalt Digital Inc.
2406 E. University Ave.
Urbana, IL 61802
9016 Owner's Manual
Specifications:
Page 4 of 4
Rev 1.1 rmw