Model 9015 Dual Monitoring Converter SDI 4:2:2 to Analog Composite Video and Reclocked SDI Owner's Manual V1.1 Copyright 2000-2012 Cobalt Digital Inc.
9015 Owner's Manual The Cobalt Digital 9015 is a high performance Dual 4:2:2 SDI digital to analog composite converter card. The card is 100% compatible with openGearTM frames. Through the use of the DashBoard Lite software, which can be found at the openGearTM website, the 9015 will report parameter status to any computer on the same network as the openGearTM frame. The DashBoard Lite software also allows for remote resetting of the video lines and hardware firmware upgrades.
9015 Owner's Manual Output Configuration LED A Locked LED B Locked R101 A-Gain S101 A-Configuration BNC2 BNC3 BNC4 BNC5 A Channel deserialize, encode, DA and SDI reclock < ANLG SDI > R201 B-Gain S201 B-Configuration B Channel deserialize, encode, DA and SDI reclock BNC6 BNC7 BNC8 BNC10 < ANLG SDI > Fig. 3: 9015 Switch and Potentiometer Locations Configuration Dip Switch Settings The 9015 has two 4 segment dip switches mounted on the forward edge of the PCB (Fig 4.); one for each converter.
9015 Owner's Manual Specifications: Input: Number of Inputs Input Standard Equalization Return Loss 2 4:2:2 SDI 525 or 625 line SMPTE 259-C Auto to 1000' Belden 1694 (typical) >15 dB at 270-Mbit Outputs (Analog): Number of outputs Format Line Standard Video Level Sync Frequency Response K-Factor Differential Gain Differential Phase Noise Chroma Luma Delay SCH Phase Quantizing Setup Return Loss 8 - User configurable Analog Composite or Reclocked SDI Analog Composite video tracking input line standard Aut
