User Manual

Page 12 9005 Owner’s Manual •
••
• (V 1.3)
Cable Connections
This section provides instructions for connecting cables to the installed BNC rear modules on the 8321
series frame backplane. Connect the input and output cables according to the following diagram. Split
rear module RM20-9005-B/S allow two cards to be installed in adjacent slots. B/S versions are
available in DIN1.0/2/3 and HDBNC versions.
RM20-9005-A RM20-9005-B/S
Note: Outputs OUT A1, OUT B2, OUT C1 and OUT C3 are inverting. These outputs are not
compatible with ASI video.
Figure 3. BNC Designations for 9005 Rear Modules