User guide

9001 Owner’s Manual •
••
• (V 1.8) Page 11
Cable Connections
This section provides instructions for connecting cables to 9001 rear modules. Connect the input and
output cables according to the following diagram. Split rear module RM20-9001-A/S and RM20-9001-
B/S allow two cards to be installed in adjacent slots. B/S versions are available in DIN1.0/2/3 and
HDBNC versions.
RM20-9001-A RM20-9001-A/S RM20-9001-B/S
Note: Early versions of 9001 have some outputs as inverting. These outputs are not compatible with
ASI video. Please contact product support and have card serial number on hand for more information.
Figure 3. Connector Designations for the Card Rear Modules