User manual

OG3-FR User Manual (V1.0) 2-29
Specifications for the OG3-FR Series Frames
This section includes the technical specifications table for the OG3-FR series frame. Note that
specifications are subject to change without notice.
OG3-FR Series Frame Technical Specifications
Category Parameter Specification
Input 100-240VAC, 47-63Hz, 500W
Output 1 12V, 28A, 336W nominal
Output 2 -7.5V, 5A, 37.5W nominal
PS-OG3
Power Supply
Total Sum of both outputs not to exceed 375W maximum
Height 2RU 3.5" (8.89cm)
Width 19" (48.26cm)
Depth 17.7” (45cm)
Dimensions
Weight with two PS-OG3 installed 20lb (9.07kg)
Number of Slots (User) 20
Per card occupying 4 slots: 5A, 60W
Per card occupying 2 slots: 2.5A, 30WMax. Power: +12V Rail
Per card occupying 1 slot: 1.25A, 15W
Per card occupying 4 slots: 0.8A, 6W
Per card occupying 2 slots: 0.4A, 3W
Max. Power: -7.5V Rail
Per card occupying 1 slot: 0.2A, 1.5W
Frame Card
Slots
Total
300W, total power consumption not to exceed 15W
maximum per card slot
Number of Inputs 2 looping
Level
1Vpp nominal
Signal
Analog video sync (black burst or tri-level), or
AES/EBU DARS
Impedance
75ohm terminating
Return Loss
>30dB to 30MHz
Reference
Inputs
Max DC on Ref Input
±1V
Ambient temperature range 0ºC to 40ºC (32°F to 104°F)
Environmental
Humidity, non-condensing <95%