User manual

OG3-FR User Manual (V1.0) 2-7
Rear Panel Overview
The rear panel provides the communication connectors for the openGear frame control and frame-wide
references. The section summarizes the components available on the rear panels.
OG3-FR Series Frames — Rear Panel
1. PSU1 Power Supply Connector 3. Ethernet Communication Port
2. PSU2 Power Supply Connector 4. Reference Connectors
1. PSU1 Power Supply Connector
This connector is the AC Connector for the main power supply.
2. Power Supply Connector
This connector is the AC Connector for the redundant power supply.
3. Ethernet Communication Port
This Ethernet port is an RJ45 connector is used to connect the optional MFC-8322-N Network
Controller card to an external Ethernet network. This Network Controller Card is required to
bridge the external Ethernet network to the local communication bus for monitoring and control of
cards installed in the OG3-FR series frames. Only cards having the Communication bus interface
will be able to be monitored and controlled this way.