User manual

1-4 •
••
• Introduction OG3-FR Series User Manual (V1.0)
Documentation Terms and Conventions
The following terms and conventions are used throughout this manual.
Terms
The following terms are used:
• “20-slot frames” refers to OG3-FR and 8321 series frames and any available options
unless otherwise noted.
• “Board”, and “Card” refer to openGear terminal devices within openGear frames,
including all components and switches.
• “Frame” refers to any openGear frame within your video system.
• “MFC-8322-N” refers to the MFC-8322-N and MFC-8322-NS unless otherwise
indicated.
• “Network Controller Card” refers to the MFC-8322-S, MFC-8322-N, and MFC-
8322-NS unless otherwise indicated.
• “openGear frame” refers to an openGear® High Density Multi-Definition Frame.
• “Operator” and “User” refer to the person who uses the OG3-FR series frame.
• “PSU1” refers to Power Supply Unit 1 (primary) of the frame.
• “PSU2” refers to Power Supply Unit 2 (secondary) of the frame.
• “System” and “Video system” refer to the mix of interconnected production and
terminal equipment in your environment.
Conventions
The following conventions are used:
• The “Operating Tips” and “Note” boxes are used to provide additional user
information.