User manual

Chapter 3
70
To disable an attached storage device:
1. On the Server Management screen, click Maintenance on the left.
2. Click Storage at the top.
3. Click the pencil icon next to the disk you want to disable.
4. Click the Enable disk checkbox so that it is de-selected.
5. Click Confirm Modify. The browser returns to the previous
screen.
Reboot
Rebooting the RaQ 3 sometimes cures problems with certain services.
The Active Monitor software recommends when a reboot is necessary.
To reboot the RaQ 3 through your browser:
1. On the Server Management screen, click Maintenance on the left.
2. Click Reboot at the top.
3. In the table that appears, click Reboot.
You can also reboot the RaQ 3 through its LCD console; refer to
“Rebooting” on page 137 in Appendix A.
Rebooting can take as long as a few minutes.
Shutdown
!
Caution: Turning off the power switch before the RaQ 3 tells
you to do so can result in lost or corrupted data.
The RaQ 3 can only be shut down from the LCD console located on the
front of the unit. Refer to “Powering down” on page 138 in Appendix A.
Shutting down may take as long as a few minutes.