User manual

Chapter 3
68
Add-on storage support
On a RaQ 3 equipped with a SCSI connector (RaQ 3i configuration
only), the Cobalt UI allows disk devices on the SCSI bus to be used as
additional storage for virtual sites. A virtual site cannot span multiple
disks and the disk must remain connected to the RaQ 3 for proper
operation of the virtual sites stored on the disk. The RaQ 3 does not
automatically recognize virtual sites on an external disk transferred
from another RaQ 3.
In the Maintenance section of the Server Management screen, the
administrator can add and format a non-removable disk storage device
to the RaQ 3.
Note: You must power down the RaQ 3 before adding or
removing an add-on storage device.
Figure 25 shows the Available Storage table.
Figure 25 Available Storage table