User manual

Chapter 3
58
Time
The RaQ 3 Administrator can configure the correct time and date and
the time zone for the RaQ 3.
1. On the Server Management screen, click Control Panel on the
left. The Service Settings table appears.
2. Click Time at the top. The Time Settings table appears.
3. Select the time and date with the pull-down menus.
4. Select the correct time zone by clicking in the Region, Country and
Locale/Zone fields.
5. As an option, you can also specify the name of a Network Time
Protocol (NTP) server with which the RaQ 3 will synchronize its
internal clock every night. Enter the host name or IP address of the
NTP server.
You can find a list of publicly available NTP servers at:
http://www.eecis.udel.edu/~mills/ntp/servers.html.
6. Click Save Changes.
Maintenance
The Maintenance section of the Server Management screen provides
several Web-based utilities that facilitate RaQ 3 day-to-day operations.
To access these utilities:
1. On the Server Management screen, click Maintenance on the left.
The File Backup table appears.
2. Choose a utility at the top. The utitilities are described in the
following sections.
Backup
!
Caution: A backup captures data only (for example, email
messages stored on the server or Web files). It does NOT back
up the settings for virtual sites or users.
As the RaQ 3 Administrator, you can perform different types of backups
in the user interface. This is a separate function from the Legato and
Arkeia backup support features.