User manual

RaQ 3 Server Management
53
The RaQ 3 Administrator can can enable or disable the FTP server.
1. On the Server Management screen, click Control Panel. The
Service Settings table appears.
2. Click the check box next to File Transfer Protocol (FTP) Server to
on or off.
3. Click Save Changes.
Telnet server
Telnet access is available but only advanced users should use telnet. An
advanced user is someone who is proficient in the workings of a
Unix®-style operating system. It is possible to adversely affect the
performance of your RaQ 3 if you modify system configuration files.
Note: Granting shell access can greatly compromise the
security of your RaQ 3.
Note: Disabling the telnet server in the service menu denies
telnet access to all users, even if they have been granted “shell”
access.
The RaQ 3 Administrator can can enable or disable the telnet server:
1. On the Server Management screen, click Control Panel. The
Service Settings table appears.
2. Click the check box next to Telnet Server to on or off.
3. Click Save Changes.
Simple Network Management Protocol (SNMP) agent
The RaQ 3 Administrator can can enable or disable the Simple Network
Management Protocol (SNMP) agent:
1. On the Server Management screen, click Control Panel. The
Service Settings tble appears.
2. Click the check box next to Simple Network Management Protocol
(SNMP) agent to on or off.
3. If you are disabling the SNMP agent, click Save Changes. If you
are enabling the SNMP agent, click on the Parameters link next to
the option in the Service Settings table.