User manual

RaQ 3 Server Management
45
Both the Site Administrator and the RaQ 3 Administrator can configure
the site user default settings. See “Setting defaults for a site user” on
page 81.
After creating a virtual site, you can add or remove users for that site,
and assign a Site Administrator. See “Adding a site user” on page 83.
For information on changing the settings for a particular virtual site, see
“Changing site settings” on page 94.
For information on removing a site user from a particular virtual site,
see “Removing a site user” on page 86.
RaQ 3 Administrator
!
Caution: Be sure to remember the password you enter here
— otherwise, you will need to reset it (See “Resetting the RaQ 3
Administrator password” on page 46).
In the Administrator section of the Server Management screen, you
enter information about the RaQ 3 Administrator — including user
name, password and, optionally, an email address where system alerts
for failed services are sent.
To enter the information for the RaQ 3 Administrator:
1. On the Server Management screen, click Administrator on the
left. The Administrator Settings table appears.
2. Enter the first name and last name of the administrator.
3. Enter the password twice to ensure that you have entered it as
intended. For guidelines on choosing a password, see “Entering the
administrator settings” on page 25.
4. As an option, enter an email address that will receive system alerts
for failed services.
5. Click Save Changes.