User manual

RaQ 3 Server Management
41
To enable the bandwidth management feature:
1. In the Server Management screen, click Site Management on the
left.
2. Click the wrench icon next to the virtual site on which you want to
enable the bandwidth management feature.
3. Click Site Settings on the left.
4. Click the checkbox next to Bandwidth Limit in the table.
5. The value of the bandwidth limit is in Kb/s. The minimum
bandwidth limit is 10 Kb/s.
Enter the value of the bandwidth limit in the field.
6. Click Save Changes.
Setting defaults for a virtual site
There are many advantages for setting defaults for the virtual sites. For
example, since multiple sites can now share an IP address, a default
IP address can be set for all new virtual sites added. Also, since it is
common for many sites to share a common domain name, it can be
desirable to set a default domain name for your virtual sites.
The same is true of all the options for a virtual site; it is best for you to
decide the needs of your typical virtual site before assigning these
values.
Site defaults and site settings can only be configured by the RaQ 3
Administrator. If the RaQ 3 Administrator enables either the FrontPage
Server Extensions service or the Shell Accounts service, the Site
Administrators can enable or disable FrontPage user webs, and enable
or disable individual (per-user) shell access.