User manual

Setting up the RaQ 3
23
If the RaQ 3’s network settings were configured successfully, then the
Cobalt welcome screen appears; see Figure 10.
Click the Start button to begin using the Setup Wizard.
Figure 10 RaQ 3 Welcome screen
Configuring the RaQ 3 with the Setup Wizard
To configure the RaQ 3, enter information into the fields on the Setup
Wizard screen (see Figure 11). These fields are described in the
sections that follow.
Note: For help with a particular field in the Setup Wizard, move
the pointer over the Active Assist
icon adjacent to the field
and help text is displayed at the bottom of the screen.