User manual

Chapter 2
18
If you plan to use the RaQ 3 on a flat surface, attach the rubber feet to
the five indentations in the bottom of the case; see Figure 6.
Figure 6 Rubber feet for the RaQ 3
If you plan to operate the RaQ 3 in an equipment rack, first connect the
mounting ears to the sides of the RaQ 3 (see Figure 7), near either the
front or the rear of the case. Attach the ears to the equipment rack.
Figure 7 Mounting ears for the RaQ 3
Rubber feet
S
E
S
E
S
E