User manual

ManualsBrandsCobalt Digital Inc ManualsHome building and DecorCobalt NASRaQ

Chapter 1

Rear view of the RaQ 3

Figure 2 RaQ 3 rear view

1. The

Security lock hole

is used to lock the unit to a secure location.

2. The

Cooling fans

maintain proper operating temperature. Ensure

that the ventilation holes are not blocked.

3. The

USB port

provides a Universal Serial Bus connection

4. The

SCSI connector

enables a Small Computer System

Interface (SCSI) connection for connecting such devices as hard

drives. The SCSI connector is available on the RaQ 3i

conﬁguration only.

5. The

Network status indicators/OK to Power Off

signal network

activity and information. The OK to Power Off light ﬂashes when

it is safe to turn the power off.

6. The

Serial console port

allows you to connect serial devices.

7. The

Serial connector

allows you to connect a UPS to the serial port

for Smart UPS support.

8. The

PCI expansion slot

provides space for adding a PCI card; the

expansion slot is available on the RaQ 3i conﬁguration only.

9. The

Network connectors

enable Ethernet network connections and

accept the 10/100 BaseT network cables.

Network connection 2

(RaQ 3i conﬁguration only)

10.

Network connection 1

11.

Cooling fan

12. The

Power switch

toggles the power on or off.

13. The

Power socket

receives the AC cord that is provided.

100 - 240 VAC 50/60 Hz

1.4 A 60W max

Cobalt Networks

and

Cobalt RaQ

are

trademarks of Cobalt Networks, Inc.

www.cobalt.com

P/N 550-00135-01

Link

Tx/Rx

Link

Tx/Rx

11 12 13