User manual

Introduction

Front view of the RaQ 3

Figure 1 RaQ 3 front view

1. The

Status Indicators

signal Ethernet and hard drive activity:

Tx/Rx

(Transmit/Receive) blinks when there is network trafﬁc

on the primary interface.

Link

indicates an active network connection on the primary

interface.

Col

blinks when a collision is detected on the primary

interface.

100 M

indicates that 100 BaseT ethernet is being used on the

primary interface.

Disk

indicates activity on the hard disk drive.

2. The

Web

indicator blinks to indicate Web activity.

3. The

Logo Badge

glows when the RaQ 3 is powered on.

4. The

LCD screen

displays messages and values entered. Use the

arrow buttons to toggle between choices or to enter values. (See

“Using the LCD console to conﬁgure the network” on page 20.)

5. You can use the recessed

Reset Password

button if you forget the

RaQ 3 Administrator password. (See “Resetting the RaQ 3

Administrator password” on page 46.)

6. The

LCD arrow buttons

allow you to enter network conﬁguration

information, conﬁgure a UPS unit, reboot the RaQ 3 and power

down the RaQ 3.