User manual

Product Specifications
143
Adding a memory module or PCI card
Be careful not to damage components during the upgrade.
5. Adding a memory module
• You can install a DIMM module in either Memory Slot 1 or
Slot 2. See Figure 44.
6. Adding a PCI expansion card
• Remove the PCI slot cover, and its retainer and screw. See
Figure 43.
• Plug the PCI card into the PCI connector. See Figure 44.
• Replace the PCI retainer and screw to hold the PCI card in
place.
• Save the PCI slot cover in case you want to remove the PCI card
later.
7. Replace the top cover.
Secure the top cover properly and replace the ten screws that hold the
top cover in place. See Figure 43.
Figure 43 shows how to remove the top cover of the RaQ 3.
Figure 43 Top cover on the RaQ 3
1
3
2
4
5
6
7
8
9
10
PCI retainer
PCI slot cover
PCI screw