User manual

129
Chapter 6
New Features on the RaQ 3
The following sections describe the new features available on the
RaQ 3.
Add-on storage support
On a RaQ 3 equipped with a SCSI connector (RaQ 3i configuration
only), the Cobalt UI allows disk devices on the SCSI bus to be used as
additional storage for virtual sites.
For more information, see “Add-on storage support” on page 68.
Disaster recovery
The RaQ 3 uses Arkeia software. The Arkeia software can be used to
back up the content and data on the RaQ 3. In case of failure, this data
can then be restored to the RaQ 3.
For more information, see “Arkeia file backup” on page 54.
Output bandwidth management
The RaQ 3 allows you to set an output bandwidth limit for each
IP address you assign to a RaQ 3. This feature is available when you
create a virtual site on the Server Management screen or when you
modify the settings of a virtual site. The virtual site must have an
IP address associated in order to specify a bandwidth limit.
For more information, see “Output bandwidth management” on
page 40.
Search and sort
The RaQ 3 offers a search function and a sort function, on both the
Virtual Site List table and the User List table. These functions are
useful if you have a large number of virtual sites or site users on your
RaQ 3 and you want to restrict the display to certain virtual sites or site
users.