User manual

Phase 1: Making the connection

Cobalt Qube 3 User Manual 19

6. Press the button.

The LCD displays:

[S]AVE [C]ANCEL

7. To save the conﬁguration information, use the left and right arrow buttons to

select [S]ave, and then press the button. It pauses for a moment and

then you will see:

Setting up Network

After verifying and saving, the Qube 3 completes the boot process. The LCD

screen shows several messages in succession before displaying the IP address

assigned to the Qube 3.

Conﬁguration is complete when the LCD screen displays the IP address assigned

to the Qube 3, for example:

IP ADDRESS:

192.168.25.77

✍

Note: Selecting [C]ancel cancels the conﬁguration and the

LCD screen displays PRIMARY IP ADDR: again. You must repeat

the entry process.