User manual

Qube 3 hardware
Cobalt Qube 3 User Manual 3
1. The PCI slot shield covers the PCI expansion slot of the Qube 3. This shield
is removed when a PCI expansion card is plugged in. (See “Adding
components to the Qube 3” on page 216.)
2. The SCSI connector provides an Ultra SCSI connection (optional).
3. On/Off power switch.
4. You can use the recessed Reset Password button if you forget the Qube 3
Administrator password. (See “Resetting the Qube 3 Administrator
password” on page 103.)
5. The USB port provides a Universal Serial Bus connection.
6. The Secondary Network Interface accepts a 10/100 BaseT network cable.
7. The Primary Network Interface accepts a 10/100 BaseT network cable.
8. The high-speed Serial port allows you to connect a standard
(Hayes™-compatible) external analog modem, an Integrated Services
Digital Network (ISDN) terminal adapter or a console.
9. The Power socket receives the power connector from the power adaptor.
10. The LCD Console allows you to enter network configuration information,
reboot the Qube 3, reset the network configuration, reset the IP firewall
filtering rules and power down the Qube 3.
11. The LCD screen displays messages and values entered. Use the arrow
buttons to toggle between choices or to enter values. (See “Using the LCD
console to configure the network” on page 13.)
12. The Security lock hole allows you to secure your Qube 3 with a standard
security cable.