User manual

Appendix A: Using the LCD Console
206 Cobalt Qube 3 User Manual
The LCD screen returns to the normal display with the fully qualified domain
name on the top line and the IP address on the bottom line.
To re-enable the filtering rules through the Server Desktop:
1. On the Server Desktop, select Administration > Network Services > Basic
Firewall.
The Firewall Settings table appears.
2. Click the check box to Enable Firewall.
3. Click Save.
To re-enter the static routes through the Server Desktop, see “TCP/IP” on
page 162.
Language
You can change the language through the LCD console. The selected language
applies to the Server Desktop UI, the messages and commands on the LCD
screen and the alert messages that Active Monitor sends to the Qube 3
Administrator.
To change the language selection:
1. On the LCD console, hold down the button for approximately two
seconds. The LCD screen displays:
SELECT:
SETUP NETWORK
2. Press the button until LANGUAGE appears in the LCD screen:
SELECT:
LANGUAGE
3. Press the button.
4. Press the button to scroll through the language choices. The choices are
displayed in their native language (for example, English or Español).
5. When your language choice is displayed, press the button. The
software processes the new language choice. After a few seconds the
LCD screen returns to the normal display with the fully qualified domain
name on the top line and the IP address on the bottom line.
If you proceed through the LCD commands again, they are displayed in the new
language.