User manual

Chapter 5: Administration Site
172 Cobalt Qube 3 User Manual
Power (Reboot)
Rebooting the Qube 3 sometimes cures problems with certain services. The
Active Monitor software recommends when a reboot is necessary.
For security reasons, you cannot power down the Qube 3 through the Desktop
Server; you have to power down the server through the LCD console. This screen
lists the steps for powering down.
For more information, see “Power down” on page 203.
To reboot the Qube 3 through the Server Desktop:
1. Select Administration > System > Power. The Reboot screen appears with
the following button.
2. Click the Reboot Now button. A confirmation dialog appears.
3. Click OK. A dialog appears stating that the server is rebooting and that the
reboot can take as long as a few minutes.
4. Once the Qube 3 reboots, the browser should refresh to the Login screen. If
it does not, point your browser to the IP address of the Qube 3.
You can also reboot the Qube 3 through the LCD console; refer to “Reboot” on
page 202.
!
Caution: Turning off the power switch before the Qube 3 tells you
to do so can result in lost or corrupted data.