User manual

Chapter 5: Administration Site
154 Cobalt Qube 3 User Manual
Viewing a chain of rules
To view a chain of rules:
1. Select Administration > Network Services > Basic Firewall . The Firewall
Settings table appears; see Figure 75.
2. From the Select Section pull-down menu, select Input Rule Chain, Forward
Rule Chain or Output Rule Chain.
The rules table for that chain appears, displaying the list of rules currently
configured for that rule chain.
Figure 75. Sample of a list of Firewall rules
Changing the default policy for a chain
To change the default policy for a chain of rules:
1. Select Administration > Network Services > Basic Firewall . The Firewall
Settings table appears.
2. From the Select Section pull-down menu, select Input Rule Chain, Forward
Rule Chain or Output Rule Chain.
The rules table for that chain appears, displaying the list of rules currently
configured for that rule chain.
3. In the Default Policy pull-down menu, select the default policy you want to
apply to this rule chain. For definitions of the policies, see “Policy
definitions” on page 153.
4. Click Save .