User manual

Network Services
Cobalt Qube 3 User Manual 151
Configuring the firewall settings
To configure the Basic Firewall settings:
1. Select Administration > Network Services > Basic Firewall . The Firewall
Settings table appears.
2. The Firewall Settings table consists of three more sections that you access
with the Select Section pull-down menu. These are shown in Figure 72,
Figure 73 and Figure 74.
The rule tables list the IP filtering rules for the firewall currently functioning.
You can perform the following actions in the Rules tables:
• Click Add to add a new rule. See “Adding a firewall rule” on page 155.
• Click the green pencil icon to edit a rule. See “Modifying a firewall rule”
on page 156.
• Click the red trash can icon to delete a rule. See “Deleting a firewall rule”
on page 159.
• Click Apply Changes Now to apply rule changes to the firewall
currently functioning. The Apply Changes Now button is greyed out
until you modify rules that define your firewall. Your changes do not
take effect until you click this button.
3. After making changes in one of the Firewall Settings tables, click Save .