User manual

Users and Groups
Cobalt Qube 3 User Manual 115
Adding a group
To add a group:
1. Select Administration > Users and Groups > Group List. The Group List
table appears.
2. Click Add. The Add New Group table appears; see Figure 46.
Figure 46. Add New Group table
3. Fill in the fields:
• Group name. Enter the name of the group. The name can be a maximum
of 12 characters long; you can only use lowercase English letters,
numbers, and the hyphen (-) and underscore (_) characters.
• Maximum allowed disk space (MB). This value is the amount of disk
space available to a group for file storage and Web pages. The value
entered must be a whole number greater than zero (you cannot enter
zero).
If you leave this field blank, the user has unlimited disk space.
• User Membership. The lower part of the Add New Group table lists all
the Qube 3 users. Select one or more names and click on the arrows to
move the name(s) between the Users Affiliated and Users Not Affiliated
lists.
• Remarks. You can enter additional information about the group in this
field.
4. Click Save.