User manual

Appendix C

Changing the Admin Password from the Browser

If you know the administrator password and want to change it,

follow these steps:

1. Go to the Administrator Site.

2. Click the Users button on the left side of the screen.

3. Click the Administrator button at the top of the screen.

4. Enter the new password.

5. Click Save Changes.

Telnet Access

Telnet access is available and should be used by advanced users

only. It is possible to adversely affect the performance of your

NASRaQ if you modify your systemÕs conÞguration Þles.

Note: Only the ÒrootÓ user can telnet into the NASRaQ.

The Access Rights section under the control panel gives you two

options for controlling telnet access. The Þrst option allows you

to disallow telnet access. This is the most secure and safest option

for the NASRaQ. The second option limits telnet access to the

ÒrootÓ user only. This option poses security risks, but it allows the

system administrator to conÞgure options supported by the

Linux operating system that cannot be conÞgured through the

web-based administration user interface.

If you plan to use telnet access, Cobalt recommends that you use

the control panel to grant telnet access when you are using it and

then disable access when you have Þnished.