User manual

NASRaQ Administration
35
RAID
The RAID mode is determined during initial wizard setup.
After the mode has been set, you cannot change the RAID
mode.
Maintenance
The Maintenance section provides several web-based utilities
that facilitate the day-to-day operations of the NASRaQ. To
access these utilities, click Maintenance on the Administrator
Site, then click the button that corresponds to the utility you
want to use (each utility is described later in this chapter).
Figure 19 Maintenance Administration Screen
Backup
The NASRaQ's system conÞguration data, stored in a Þle
called conÞg.tar, is available in a built-in share called
BACKUP.
This data can be backup up regularly to a tape drive or
simply copied onto the hard drive of a different computer.
The conÞg.tar Þle contains enough information to recover the
system conÞguration in the event of a catastrophic failure.