User manual

Chapter 2
18
If you forget or want to reset the password, refer to
ÒResetting the Admin PasswordÓ on page 47.
Click the NEXT button.
3. Services Setup
The third wizard setup screen appears in Figure 8.
Figure 8 Services Setup Wizard
Choose the services you would like to be active on the
NASRaQ from the list.
You can conÞgure work groups and the WINS server by
clicking Parameters...
On the ÒWorkgroup or NT DomainÓ Þeld, enter the name of
the workgroup or NT domain where you want the NASRaQ
to appear as part of the Network Neighborhood. In the WINS
Server AddressÓ Þeld, enter the IP address of your WINS
servers. If you do not have a WINS server, leave this Þeld
blank.
For an explanation of services, refer to ÒServicesÓ on page 32.
Click the NEXT button.