User manual

Chapter 2
16
1. Network Setup
The Þrst wizard setup screen appears in Figure 6.
Figure 6 Network Setup Wizard
From the Network Setup screen, you can:
¥ Assign a hostname to the NASRaQ (for example,
nasraq1)
¥ Enter your domain name (the ofÞcial name that is
registered with InterNIC, for example, cobaltnet.com)
¥ Enter the IP address of your domain name server. The IP
address of your Domain Name Server is necessary for the
NASRaQ to convert between IP addresses and names.
The hostname and domain name must be coordinated with
your network administrator to access the NASRaQ by its
name and not just its IP address.
Click the
NEXT button.
2. Administrator Setup
The second wizard setup screen appears in Figure 7 on page
17.