User manual

Setting Up the NASRaQ
15
When you have successfully conÞgured the NASRaQ, the
setup wizard introduction is displayed (see Figure 5).
Figure 5 NASRaQ Welcome Screen
4. Click the Start button to proceed.
Configuring the NASRaQ with the Setup Wizard
The setup wizard is a step-by-step conÞguration process that
guides you through the setup process. After completing each
step, click on the NEXT button to apply the changes and go to
the next step. The NASRaQ performs automatic checks on
the information entered and alerts you when an unacceptable
value or problem is encountered.
At any point, you can click the back arrow to change a
previous setting.
When the information is correctly entered at each stage, the
NASRaQ enters the changes in its conÞguration Þles before
proceeding to the next step. Changes may take several
seconds to complete.
Note: To obtain additional help, click on the Active Assist
icon adjacent to the topic.