User manual

Chapter 2

Setting Up With the Web Browser

You need to perform the remainder of the setup process

through a web browser from any network computer. Use a

standard browser such as Netscape Navigator or Microsoft

Internet Explorer (versions 4.0 or later) to do this. After the

setup process is complete, the NASRaQ can be managed from

any browser-enabled computer on the network.

Active Assist — Online Help

Active Assist provides real-time context-sensitive help that

you can access at any time by placing the cursor over the

icon beside any item. More information about the item

appears at the bottom of the browser page.

Accessing the NASRaQ

1. Start any standard web browser on any computer connected

to the network.

2. To access the NASRaQ, either enter the host name (if one has

been assigned using DHCP) or enter the IP address, found on

the NASRaQÕs LCD screen, in the URL Þeld of your browser.

For example:

3. Press

Return (or Enter) on your keyboard.