User manual

Introduction
3
Back View
¥ The Serial Connector allows for serial port console
connection.
¥ The Cooling Fan maintains proper thermal parameters.
¥ The Network Connector accepts a 10/100 Base-T
network cable.
¥ The Network Status Indicators signal network activity
and information.
¥ The SCSI Port enables connection to external SCSI
devices.
¥ The OK to Power Off light indicates when the NASRaQ
is ready to be powered down.
¥ The Power Switch toggles the power on or off.
¥ The Power Socket is where you attach the AC cord that is
provided.
Requirements
To use the NASRaQ, you need the following:
¥ A 10 Base T, 10/100 Base-T, or 100 Base-T, TCP/IP-based
local area network.
¥ A personal computer (attached to the network) that uses
a Web browser (Netscape Navigator or Microsoft Internet
Explorer, versions 4.0 or later).
¥ Network parameters, which you can obtain from your
system or network administrator, or from a DHCP server
Ñ these include the NASRaQÕs assigned IP address, the
subnet mask of your network, and a gateway/router
address (if communicating with other networks).
Serial
Connector
Cooling
Fan
OK to
Power Off
Network
Connector
Power
Socket
Serial
100 - 240 VAC 50/60 Hz
1.0 A 40W max
Tx/Rx
Link
100 M
Col
OK to
Power Off
Cobalt Networks and Cobalt NASRaQ
are trademarks of Cobalt Networks, Inc.
Network 1
www.cobaltnet.com
SCSI
Network
Status
Indicators
Power
Switch
SCSI Port