User manual

Chapter 2: Setting up the RaQ XTR
14 Cobalt RaQ XTR User Manual
Attach the ears to the chassis with the eight mounting screws included with the
server (see Figure 7). Now position the RaQ XTR in the equipment rack and
attach the ears securely to the rack.
Figure 7. Mounting ears for the RaQ XTR
Connecting to the network
Connect one end of a Category 5 ethernet cable to the 10/100 BaseT Network 1
interface on the RaQ XTR; see Figure 8. Connect the other end of the cable to an
existing network socket.
Figure 8. Network connectors
Network interface 1
(eth 0)
Network interface 2
(eth 1)