User manual

Removing a lock from the LCD panel
Cobalt RaQ XTR User Manual 239
Removing a lock from the LCD panel
If you have forgotten the sequence of arrow keys to unlock the LCD panel, you
can remove the “lock” file from the server:
1. Telnet to the server and log in as the user admin or alteradmin .
2. From the command prompt, enter:
su -
3. Press Enter . A password prompt appears.
4. Enter the administrator’s password. A command-line interface appears.
5. Enter the command:
rm /etc/cobalt/.LCK..cobtpanel
You can now assign a new sequence through the LCD console. For more
information, see “Set sequence” on page 202.
!
Caution: This feature requires you to access the RaQ XTR server
through a telnet session. Only advanced users should perform this
operation.
You can adversely affect the operation of your RaQ XTR if you
modify system configuration files. Check your warranty card for
details.
!
Caution: If you have forgotten both the RaQ XTR Administrator
password and the sequence of arrow keys, you will not be able to
access the server.
✍
Note: Direct root logins are not allowed on the RaQ XTR.
✍
Note: Only the RaQ XTR Administrator or the alternate
administrator can su - to root.