User manual

Initializing the RaQ XTR through the serial console port

Cobalt RaQ XTR User Manual 237

To initialize the RaQ XTR through the serial console port:

1. Connect a null modem serial cable to the serial console port on the back

panel of the RaQ XTR. See the following ﬁgure.

2. Conﬁgure your terminal software to the following parameters:

• 115 200 Baud

• 8 data bits

• no parity

• 1 stop bit

3. Power on the RaQ XTR with the power switch on the back panel. A number

of boot messages are displayed on your terminal screen.

4. The ﬁrst prompt asks for an IP address. Enter the Primary IP address for the

RaQ XTR (for example, 10.9.19.55).

5. The second prompt asks for the netmask address. Enter the Primary Netmask

for the RaQ XTR (for example, 255.0.0.0).

6. The third prompt asks for the gateway address. Enter the gateway for the

RaQ XTR (for example, 10.9.25.254).

7. Conﬁrm the settings that you have entered:

• Primary IP address: 10.9.19.55

• Primary Netmask: 255.0.0.0

• Gateway: 10.9.25.254

Serial

console port

USB

port

Serial

port

Network

connectors