User manual

Appendix C: Upgrading the RaQ XTR
232 Cobalt RaQ XTR User Manual
Figure 119. Removing the fan assembly
15. Note the orientation of the defective fan and how its wires are routed.
Remove the defective fan and replace it with an equivalent model. Ensure
that the replacement fan is installed with the same orientation as the original.
Check the fan wiring for areas that are pinched or kinked.
16. Re-install the fan holder to the frame and the fan assembly to the chassis by
reversing the preceding steps. Refer to Figure 120 for the correct fan wiring.
17. Re-install the cover and mounting brackets, and return the RaQ XTR to the
equipment rack.
Figure 120. Rewiring the fans
Fan Holder
Fan Assembly
Individual Fan
Mounting
Fan Holder
Tabs (4)