User manual

Appendix C: Upgrading the RaQ XTR
222 Cobalt RaQ XTR User Manual
Figure 106. Removing the cover
7. Locate the DIMM sockets at the right, rear corner of the chassis.
8. Ensure that the eject lever, at each end of the DIMM socket, is released (see
Figure 107).
9. Insert the DIMM in the target socket and use your thumbs to seat it. Note
that the DIMM’s edge connector is keyed and can only be inserted one way.
When the DIMM is completely seated in the socket, each eject lever will be
seated in the cutout in each end of the DIMM.
!
Caution: Observe proper ESD precautions and follow the
manufacturer’s instructions when handling the DIMM.