User manual

Appendix C: Upgrading the RaQ XTR
218 Cobalt RaQ XTR User Manual
3. Insert your index finger into the front plate of the drive sled and verify that
the Failure LED lights, or remains lit if it was already on (see Figure 101).
Figure 101. Disk Drive Failure LED
4. Pull the sled out of the RaQ XTR chassis (see Figure 102).
Warning: If the Failure LED does not light, or goes out when you
insert your finger in the front plate, DO NOT remove the drive.
Wait a few seconds for the drive to complete the operation in
progress, and check the LED again.
!
Caution: When you are removing a drive sled from the RaQ XTR,
it will seem to suddenly “pop” loose. Be careful not to pull the sled
from the chassis too quickly and allow it to fall.
Activity LED
Failure LED