User manual

Panel
Cobalt RaQ XTR User Manual 203
3. Press the button.
The LCD screen displays:
SELECT:
LOCK PANEL
4. Press the button until SET SEQUENCE appears in the LCD screen:
SELECT:
SET SEQUENCE
5. Press the button.
The LCD displays
Enter Sequence:
6. Enter the sequence of arrow buttons and press the button.
The LCD screen asks you to confirm the sequence:
Sequence Again:
7. Enter the sequence again and press the button.
If you entered the sequence incorrectly, the LCD screen flashes the following
message and then returns to the normal LCD display of host name and
IP address. The sequence is not changed.
ERROR: Sequences
do not match
If you entered the sequence correctly, the LCD screen displays the following
message for a few seconds and then returns to the normal LCD display of
host name and IP address:
** Sequence set **
successfully
E
S
E
E
E