User manual

Set up network

Cobalt RaQ XTR User Manual 197

5. Enter the Netmask using the arrow buttons.

6. Press the button.

7. Enter the Gateway using the arrow buttons.

8. Press the button.

9. Use the arrow buttons to toggle the cursor between [S]ave and [C]ancel.

10. Press the button.

If you select the Save option, the RaQ XTR reboots using the new network

conﬁguration. If you select Cancel, you return to step 1 of this procedure.

✍

Note:

You can also change the network conﬁguration of the

Network 1 or Network 2 interface on the RaQ XTR through the

Server Desktop UI. See “Network” on page 145.

If you change the network IP address of the RaQ XTR through the

Web browser, the RaQ XTR reboots automatically when you click

Save Changes