User manual

Appendix A: Using the LCD Console

196 Cobalt RaQ XTR User Manual

Locked LCD panel

The RaQ XTR offers a security feature that allows you to lock the LCD panel

with a “password” consisting of a sequence of arrow buttons. This prevents

unauthorized tampering with the server if people have physical access to it.

For any of the LCD functions, if the LCD panel is locked, you will be prompted

to enter the key sequence before you can access the functions. Enter the sequence

of arrow buttons and press the (enter) button. For more information, see

“Panel” on page 202.

Access to the functions

You access each of the LCD functions by holding down the (select) button

on the LCD console for approximately two seconds. This action causes the LCD

screen to enter its function mode. If the LCD panel is locked, you must enter the

correct sequence of arrow buttons to unlock the panel. Press the button

until the function you want appears on the LCD screen. To cancel the LCD

function mode, select the

EXIT

function when it appears on the screen. Press the

button and select

YES

Set up network

To reset the IP address or change the network conﬁguration of the Network 1

interface:

1. On the LCD console, hold down the button for approximately

2 seconds.

The LCD screen displays:

SELECT:

SETUP NETWORK

2. Press the button.

3. Enter the IP address using the arrow buttons. The left and right arrow buttons

move the cursor position to the left or right. The up and down arrow buttons

increase or decrease the digit at the cursor position.

4. Press the button.