User manual

BlueLinQ
Cobalt RaQ XTR User Manual 181
Install new software manually
You can install new software manually if you know the location of the software
package.
1. Select BlueLinQ > New Software. The “Available New Software List” table
appears.
2. Click Install Manually. The “Install Manually” table appears; see
Figure 91.
3. To specify the location of the software package, do one of the following:
• Click the URL radio button.
Enter a URL beginning with either http:// or ftp:// to download the
package from a location on the Internet.
• Click the Upload radio button.
Click Browse to locate a file on your local hard disk drive.
• If you have previously downloaded software packages to the
/home/packages directory on your RaQ XTR server, you can choose
one of these packages from the table.
4. Click Prepare. The system verifies that the file is in the correct .pkg format.
The system then begins to load the software.
Figure 91. Install Manually table