User manual

Chapter 5: Server Management
168 Cobalt RaQ XTR User Manual
Reboot
Rebooting the RaQ XTR can sometimes cure problems with certain services and
is required to recover from RAID failures. The Active Monitor software
recommends when a reboot is necessary.
To reboot the RaQ XTR through your browser:
1. Select Server Management > Maintenance > Reboot. The “Reboot Cobalt
Server” table appears. See Figure 83.
2. A warning is displayed in the table that rebooting the Cobalt server will
make it unavailable to the network for a few minutes.
Click Reboot. A confirmation dialog verifies the deletion.
3. Click OK.
You can also reboot the RaQ XTR through its LCD console; refer to “Rebooting”
on page 201.
The reboot process can take a few minutes.
Figure 83 shows the “Reboot Cobalt Server” table.
Figure 83. Reboot Cobalt Server table